Equilibrium Graphene Coating 50 ml Kit

Key Features / Highlights

• Advanced Graphene-Infused Coating — blends graphene’s strength with coating chemistry to deliver superior performance.

• Deep, Mirror Gloss Finish — enhances color depth and clarity for a showroom shine.

• Exceptional Durability (Up to 5 Years) — designed to last through environmental stress.

• Hydrophobic / Water-Spot Resistance — repels water and prevents staining from hard water spots.

• Scratch & Corrosion Defense — resists minor abrasions, UV, oxidation, chemical attack.

• Easy DIY Application — simple kit format with applicators, cloths, gloves included.

• High Contact Angle / Low Friction — increases self-cleaning behavior on coated surfaces.

Application / Usage Guide

1. Pre-clean & Decontaminate
   Thoroughly wash the vehicle. Use clay bar or iron remover to eliminate bonded contaminants.

2. Dry & Prep
   Ensure the surface is completely dry; mask or tape off trim, rubber, and plastic surfaces.

3. Apply Coating

   • Drop a small amount of coating on the suede pad or sponge.

   • Spread evenly over a panel (~50 × 50 cm) using a crosshatch (horizontal + vertical) motion.

   • Watch for “flash” stage (slight hazing) — wait ~30–60 seconds (time may vary with temperature/humidity).

4. Buff Off
   Use a clean microfiber towel to gently wipe off the haze, revealing a glossy finish.

5. Curing & Protection

   • Avoid water contact for at least 24 hours (or as your product’s specs suggest).

   • Full hardness / full protection develops over subsequent days (typically 7 days or per manufacturer recommendation).

6. Optional Recoat / Maintenance
   After initial cure, you may apply a second layer or booster coat for enhanced gloss/durability (if supported by product design).

Benefits & Protection

• Superior Gloss & Visual Depth — enhances paint aesthetics dramatically.

• Robust Water Repellency — fewer water spots, easier cleaning.

• Long-Term Protection — defends against UV rays, oxidation, corrosion, chemical etching.

• Scratch / Swirl Resistance — helps guard against light scratches from washing or environmental abrasion.

• Low Friction Surface — helps contaminants slide off and minimizes adherence.

• Durability in Harsh Conditions — built to last through sun, rain, road salts, pollutants.

Safety & Handling Instructions

• Avoid applying under direct sunlight or on hot panels.

• Use gloves and eye protection.

• Work in a well-ventilated area.

• Close the bottle tightly after use to prevent evaporation or contamination.

• Immediately remove any coating from rubber, plastic, glass, or trim before it cures fully.

• Perform a spot test in inconspicuous area if uncertain about substrate compatibility.