Key Features / Highlights
-
Advanced Graphene-Infused Coating — blends graphene’s strength with coating chemistry to deliver superior performance.
-
Deep, Mirror Gloss Finish — enhances color depth and clarity for a showroom shine.
-
Exceptional Durability (Up to 5 Years) — designed to last through environmental stress.
-
Hydrophobic / Water-Spot Resistance — repels water and prevents staining from hard water spots.
-
Scratch & Corrosion Defense — resists minor abrasions, UV, oxidation, chemical attack.
-
Easy DIY Application — simple kit format with applicators, cloths, gloves included.
-
High Contact Angle / Low Friction — increases self-cleaning behavior on coated surfaces.
Application / Usage Guide
-
Pre-clean & Decontaminate
Thoroughly wash the vehicle. Use clay bar or iron remover to eliminate bonded contaminants. -
Dry & Prep
Ensure the surface is completely dry; mask or tape off trim, rubber, and plastic surfaces. -
Apply Coating
-
Drop a small amount of coating on the suede pad or sponge.
-
Spread evenly over a panel (~50 × 50 cm) using a crosshatch (horizontal + vertical) motion.
-
Watch for “flash” stage (slight hazing) — wait ~30–60 seconds (time may vary with temperature/humidity).
-
-
Buff Off
Use a clean microfiber towel to gently wipe off the haze, revealing a glossy finish. -
Curing & Protection
-
Avoid water contact for at least 24 hours (or as your product’s specs suggest).
-
Full hardness / full protection develops over subsequent days (typically 7 days or per manufacturer recommendation).
-
-
Optional Recoat / Maintenance
After initial cure, you may apply a second layer or booster coat for enhanced gloss/durability (if supported by product design).
Benefits & Protection
-
Superior Gloss & Visual Depth — enhances paint aesthetics dramatically.
-
Robust Water Repellency — fewer water spots, easier cleaning.
-
Long-Term Protection — defends against UV rays, oxidation, corrosion, chemical etching.
-
Scratch / Swirl Resistance — helps guard against light scratches from washing or environmental abrasion.
-
Low Friction Surface — helps contaminants slide off and minimizes adherence.
-
Durability in Harsh Conditions — built to last through sun, rain, road salts, pollutants.
Safety & Handling Instructions
-
Avoid applying under direct sunlight or on hot panels.
-
Use gloves and eye protection.
-
Work in a well-ventilated area.
-
Close the bottle tightly after use to prevent evaporation or contamination.
-
Immediately remove any coating from rubber, plastic, glass, or trim before it cures fully.
-
Perform a spot test in inconspicuous area if uncertain about substrate compatibility.
